Jump To: Support > KB > IBM > X3650? > HBAError

x3650M4 and FC HBA gives PCI error light

1. As machine boots, hit F1 for Setup when prompted
2. Choose System Settings
3. Choose Devices and I/O Ports
4. Choose Enable / Disable Adaptor Option ROM Support
5. Go down to Slot 1(Riser 1 Slot 1), hit Return and choose Disable
6. Repeat for Slot 2(Riser 1 Slot 1) and Slot 3(Riser 1 Slot 1) (or could just do it for the slot the HBA is in)
7. Hit Escape to go back to Devices and I/O Ports menu
8. Hit Escape to go back to System Settings
9. Hit Escape to go back to main menu
10. Choose Save Settings
11. Choose Exit Setup and press Y to confirm
12. If necessary, remove all power leads and re-insert to reset the warning light

N.B. This will stop booting from SAN